NextTime NT19 Numpad 19 20% Bluetooth 2.4G 3 Mode Gasket Mechanical Keyboard kit PCB Hot Swappable Switch RGB led Next Time 19

NextTime NT19 Gasket Kit(3 Mode Edition)

Pls pay attention: To avoid damaging PCB hot-swapping sockets, pls make sure your switches' pin is vertical, and you'd better not use used key switches with soldering tin. All Option doesn’t include Keycaps, and if you order the Barebone option, you will get NT19 Kit without Switch and Keycap.

 

• Any Option doesn’t include Keycap.
• Barebone Option doesn’t include Keycap and Switch.

This kit is a Gasket Mounted Type.

The key tips below that are based on the default layout. FN is Backspace position, hold for seconds until you see the Backspace light turn into white, FN is function is on. 

 

2.4G Mode Connection Tutorial

When you first connect with 2.4G Mode, pls switch the battery button(at bottom of the case) on first, then press FN+4 for 3 sec to make sure the 4 key green LED is twinkling, then plug the 2.4G Adapter in, NT19 will match the adapter automatically.

Pls don't plug the 2.4G Adapter in before you press FN+4, otherwise NT19 cant find it.

 

 

Bluetooth Connection Tutorial

• Make sure your keyboard is not connected to a cable
• Turn the battery button on(at the bottom of the keyboard)
• Press Fn+1 or 2 or 3 for 3 sec, make sure NT19 is in pairing mode
• Then search Bluetooth device on your mobile device and connect with NT19, next time, you just need to press Fn+1 or 2 or 3 to change with different devices.

LED Control with Combine Key

• FN+* key = change LED effect
• FN+ plus key = increase brightness
• FN+ minus key = decrease brightness

 

NT19 Barebone Edition=NT19 Kit Only(without Keycap and switch)

NT19 Gateron Switch Edition=Barebone Edition+Gateron Switch x20