Pls pay attention: To avoid damaging PCB hot-swapping sockets, pls make sure your switches' pin is vertical, and you'd better not using used key switches with soldering tin.
BM980 RGB PCB
PCB dimension: approx. 37.4 x 12.4 cm
- Kit1:BM980 RGB PCB+BM980 Stabilizers
- Kit2:BM980 RGB PCB+Black Plastic Case+BM980 Plate
- Kit3:BM980 RGB PCB+White Plastic Case+BM980 Plate
- Kit4:BM980 RGB PCB+Black Plastic Case+BM980 Plate+BM980 Stabilizer
- Kit5:BM980 RGB PCB+White Plastic Case+BM980 Plate+BM980 Stabilizer
- Kit6:BM980 RGB PCB+BM980 Stabilizers+BM980 Plate+ Plastic Case (Pls mark with Black/White) + 100 Gateron Switches (Pls mark type)
- Kit7:BM980 RGB PCB+ BM80 Stabilizers +BM980 Plate+ Plastic Case (Pls mark with Black/White) + 100 Gateron Switches (Pls mark type)+ CoiledCable (Pls mark color from grey/white/black)
- Kit8:BM980 RGB PCB+ 100 Gateron Switches (Pls mark type)
Pls Pay attention:
1.Switch doesn't include the Gateron silent switch.
2.You can choose from Gateron Clear/Blue/Green/Yellow/Red/Brown/Black with 3pin SMD.
3.If you order a PCB, you will only get a BM980 RGB PCB.
4.At this link, not including any CNC case or any keycap:).
5.Pls don't use any third party hex flashing firmware file, it may cause RGB led issue or power supply problem.
Spec
1\98 keys(with Numpad Zone)
2\Fully programmable PCB(VIA supported)
3\Full hot-swappable switch sockets
4\Full RGB switches Leds(With kinds of LED effects)
5\MX Stem support
6\All components of the board have been pre-soldered so the PCB is ready for key switches and LEDs
7\Type C port
How to flash BM980 RGB
Check KPrepublic Download tab
Pls pay attention: PCB only, not including other things.
