BM60 RGB PCB
NOTE
- Before soldering switches, please test all keys (use tweezers or iron wire) and LEDs(If PCB can or not support 2pin single colour led or RGB led) to make sure all functions work properly. BEFORE soldering, if the PCB has any key problems, we can re-ship a new one. AFTER soldering, we are sorry that we can't re-ship any replacements. However, we are able to help you to repair it (buyer needs to pay for the returning shipping fee).
- Pls pay attention: To avoid damaging PCB hot-swapping sockets, pls make sure your switch pins are vertical, and you'd better not using used key switches with soldering tin.
- If you order our products, we assume that you agree with the above terms.
-
If your PCB Version is V2, you need to flash with V2.json, if you flash with V1 firmware, it will cause an unknown issue.
Kit 8 will be shipped with Black case and Gateron Standard Yellow switches by default. If you want a clear or white case instead of Black case, and other Gateron standard switches, please leave a note at checkout when placed order. If you don't leave a note, the warehouse will ship the order of Kit 8 as default.
Kit 9 will be shipped with Black case and Gateron Standard Yellow switches and black cable by default. If you want a clear or white case instead of Black case, and other Gateron standard switches, and a white cable, please leave a note at checkout when placed order. If you don't leave a note, the warehouse will ship the order of Kit 9 as default.
Kit 10 will be shipped with Gateron Standard Yellow switches by default. If you want other Gateron standard switches, and a white cable, please leave a note at checkout when placed order. If you don't leave a note, the warehouse will ship the order of Kit 10 as default.
KIT OPTION
- Kit1: BM60 RGB PCB+BM60 Stabilizers
- Kit2: BM60 RGB PCB+Black Plastic Case
- Kit3: BM60 RGB PCB+[2.25U Lshift]Alu Plate
- Kit5: BM60 RGB PCB+Black Plastic Case+BM60 Stabilizers
- Kit6: BM60 RGB PCB+White Plastic Case
- Kit7: BM60 RGB PCB+White Plastic Case+BM60 Stabilizers
- Kit8: BM60 RGB PCB+Alu Plate(2.25u Lshift)+Black Plastic Case+BM60 Stabilizers+70 Gateron Standard Yellow Switches
- Kit9: BM60 RGB PCB + Alu Plate(2.25u Lshift)+ Black Plastic Case+BM60 Stabilizers+70 Gateron Standard Yellow Switches+Coiled Black Cable
- Kit10: BM60 RGB PCB + 70 Gateron Standard Yellow Switches
SPEC
- 1\More than 60 keys
- 2\Supports offline flash app
- 3\Fully programmable PCB(QMK supported)
- 4\Full hot swappable switch sockets
- 5\Full RGB switches Leds(With kinds of LED effects)
- 6\6 bottom RGB underglow leds(pre-soldered)
- 7\Standard ICSP interface
- 8\MX Stem support
- 9\All components of the board have been pre-soldered so the PCB is ready for key switches and LEDs
- 10\Type C port
How to flash BM60 RGB, pls refer to this link:
Pls pay attention: PCB only, not including other things.
