BM60 RGB PCB
Before soldering switches, please test all keys (use tweezers or iron wire) and LEDs(If PCB can or not support 2pin single colour led or RGB led) to make sure all functions work properly. BEFORE soldering, if the PCB has any key problems, we can re-ship a new one. AFTER soldering, we are sorry that we can't re-ship any replacements. However, we are able to help you to repair it (buyer needs to pay for the returning shipping fee).
- Pls pay attention: To avoid damaging PCB hot-swapping sockets, pls make sure your switch pins are vertical, and you'd better not using used key switches with soldering tin.
- If you order our products, we assume that you agree with the above terms.
If your PCB Version is V2, you need to flash with V2.json, if you flash with V1 firmware, it will cause an unknown issue.
Kit1:BM60 RGB PCB+BM60 Stabilizers
Kit2:BM60 RGB PCB+Black Plastic Case
Kit3:BM60 RGB PCB+[2.25U Lshift]Alu Plate
- Kit5:BM60 RGB PCB+Black Plastic Case+BM60 Stabilizers
Kit6:BM60 RGB PCB+White Plastic Case
Kit7:BM60 RGB PCB+White Plastic Case+BM60 Stabilizers
Kit8:BM60 RGB PCB+Alu Plate(2.25u Lshift)+Plastic Case(Pls mark with Black/White/CLear for us)+BM60 Stabilizers+70 Gateron Switches(Pls mark type for us:3pin SMD/RGB or 5pin RGB)
Kit9: BM60 RGB PCB + Alu Plate(2.25u Lshift)+ Plastic Case(Pls mark with Black/White/CLear for us)+BM60 Stabilizers+70 Gateron Switches( Pls mark type for us:3pin SMD/RGB or 5pin RGB )+Coiled Cable(Pls mark color from grey/white/black for us)
Kit10: BM60 RGB PCB + 70 Gateron Switches( Pls mark type for us:3pin SMD/RGB or 5pin RGB )
Pls Pay attention: you can choose from Gateron Clear/Blue/Green/Yellow/Red/Brown/Black with 3pin RGB/5pin RGB/3pin SMD/5pin SMD.If you order PCB, you will only get a BM60 RGB PCB, and at this link, not including any CNC case or any keycap:).
- 1\More than 60 keys
- 2\Supports offline flash app
- 3\Fully programmable PCB(QMK supported)
- 4\Full hot swappable switch sockets
- 5\Full RGB switches Leds(With kinds of LED effects)
6\6 bottom RGB underglow leds(pre-soldered)
- 7\Standard ICSP interface
- 8\MX Stem support
- 9\All components of the board have been pre-soldered so the PCB is ready for key switches and LEDs
- 10\Type C port
How to flash BM60 RGB, pls refer to this link:
Pls pay attention: PCB only, not including other things.